ACCUVISION 200 0001-0003-01 Secs Receiver Card Digital Cable J1 I/o P/n

( Brand: Accuvision 200 ), ( Model: 0001-0003-01 REV. B ), ( Part Type: Digital Receiver Card Cable ), ( Manufacturer Part Number: 0001-0003-01 ), ( Weight: 5.0000 )

Review ACCUVISION 200 Secs Receiver J1 Card And Digital I/o Cable P/n

The AccuVision 200 0001-0003-01 SECS Receiver J1 Card is a digital I/O cable designed for use with AccuVision SECS (Supervisory Control and Data Acquisition System) receivers. This cable allows for the transfer of Supervisory Control and Data Acquisition (SCADA) data between the receiver and other devices or systems.

The J1 Card features a digital I/O interface, which allows for the transmission of digital signals between the receiver and other devices. Each end of the cable is equipped with a J1 connector, which is a common interface used in SCADA systems. The cable is 1 meter (3.28 feet) in length, providing a sufficient length for most installation applications.

The AccuVision 200 0001-0003-01 SECS Receiver J1 Card is designed to comply with the SECS v2.0 protocol, ensuring compatibility with a wide range of SCADA systems. The cable is also designed to operate in harsh industrial environments, with a robust construction that can withstand the demands of industrial applications.

The digital I/O signals transmitted via this cable can be used to monitor and control various process variables, such as temperature, pressure, flow rate, and level. The cable is also capable of transmitting alarms and events, allowing operators to respond to critical situations in real-time.

The AccuVision 200 0001-0003-01 SECS Receiver J1 Card is an essential component for integrating AccuVision SECS receivers into larger SCADA systems. With its robust construction, digital I/O interface, and compatibility with the SECS v2.0 protocol, this cable is an ideal choice for industrial applications that require real-time data acquisition and control.

The AccuVision 200001-0003-01 SECS Receiver J1 Card Digital I/O Cable is a component used for data communication between Supervisory Control and Data Acquisition (SCADA) systems and industrial equipment. Here are some potential pros and cons of buying this specific cable:

1. Compliance with SECS protocol: This cable is designed to comply with the SECS protocol, which is widely used in the power generation and industrial automation industries for data exchange between master and slave devices.

2. Digital I/O capability: The digital I/O capability of this cable allows for the transmission of digital signals between devices, which can be useful for various applications such as process control and monitoring.

3. Durable construction: The cable is designed to withstand harsh industrial environments, making it suitable for use in applications where the cable may be subjected to vibration, temperature extremes, or other environmental stresses.

4. Easy installation: The cable is plug-and-play, meaning it can be easily installed without the need for complex configuration or setup.

1. Limited compatibility: This cable is designed specifically for use with AccuVision SECS receivers, so it may not be compatible with other types of receivers or SCADA systems.

2. Cost: The cable may be more expensive than other digital I/O cables due to its SECS compliance and industrial-grade construction.

3. Single-point failure: Since the cable is a critical component in the data communication system, a failure of the cable could result in downtime or production losses.

The AccuVision 200001-0003-01 SECS Receiver J1 Card Digital I/O Cable is a specialized cable designed for use in industrial applications where SECS compliance and digital I/O capability are required. While it may be more expensive than other digital I/O cables, its durability and compliance with industry standards make it a valuable investment for organizations that rely on SCADA systems for process control and monitoring.

If you are in the market for a digital I/O cable for use in a SCADA system and require SECS compliance, then the AccuVision 200001-0003-01 SECS Receiver J1 Card Digital I/O Cable is a good option to consider. However, if you are not required to use SECS protocol or do not need digital I/O capability, then a less expensive digital I/O cable may be a more cost-effective option for your needs.

Details:

This item has been inspected and appears to be in good condition. Condition: Used. Accuvision 200 SECS II Receiver J1 Card and Digital I/O Cable p/n 0001-0003-01 R e p/n: 0001-00219-00.

part #: 0001000301 price

• $122.10

specifications plcmechanize:

• brand: Accuvision 200
• model#: 0001-0003-01 REV. B
• part type: Digital Receiver Card Cable
• manufacturer part number: 0001-0003-01
• weight: 5.0000

shipping plcmechanize:

• transit: 3-8 Days
• service: FedEx Ground / FedEx Home Delivery, USPS Priority Mail
• class: Standard, Expedited
• cost: $31.79
• type: Calculated
• carrier: FedEx, USPS

general plcmechanize:

• Industrial Automation Motion Controls > PLCs HMIs > PLC Processors
• condition: Used

offer plcmechanize:

• availability: In Stock
• started: January 14, 2026
• quantity: 1
• sold: 0
• options: Ship-to-home
• best offers: True

seller plcmechanize:

• rating: 99.8%
• # reviews: 22587
• city: Ventura, California

payments plcmechanize:

• other
• credit card: Diners-club
• wallet: Apple-pay

returns plcmechanize:

• time: 30 Days
• paid by: Buyer
• method: Money back
• policy: Returns Accepted